Mediant 2000 SIPMediant 2000 SIP User’s Manual 78 Document #: LTRT-725045.11 Software Update MenuThe ‘Software Update’ menu enables users to upgrade the Mediant 2000 software by loading anew cmp file along with the ini and a suite of auxiliary files, or to update the existing auxiliary files.The ‘Software Update’ menu comprises two submenus:• Software Update Wizard (refer to Section 5.11.1 below).• Auxiliary Files (refer to Section 5.11.2 on page 82).Note: When upgrading the Mediant 2000 software you must load the new cmp filewith all other related configuration files5.11.1 Software Upgrade WizardThe Software Upgrade Wizard guides users through the process of software upgrade: selectingfiles and loading them to the gateway. The wizard also enables users to upgrade software whilemaintaining the existing configuration. Using the wizard obligates users to load a cmp file. Userscan choose to also use the Wizard to load the ini and auxiliary files (e.g., Call Progress Tones)but this option cannot be pursued without loading the cmp file. For the ini and each auxiliary filetype, users can choose to reload an existing file, load a new file or not load a file at all.Warning 1: The Software Upgrade Wizard requires the Mediant 2000 to be reset atthe end of the process, disrupting any of its traffic. To avoid disruption,disable all traffic on the Mediant 2000 before initiating the Wizard.Warning 2: Verify, prior to clicking the Start Software Upgrade button that no traffic isrunning on the device. After clicking this button a device reset ismandatory. Even if you choose to cancel the process in the middle, thedevice resets itself and the previous configuration burned to flash isreloaded.¾ To use the Software Upgrade Wizard, take these 9 steps:1. Stop all traffic on the Mediant 2000 (refer to the note above).2. Open the ‘Software Upgrade Wizard’ (Software Update menu > Software UpgradeWizard); the ‘Start Software Upgrade’ screen appears.Figure 5-29: Start Software Upgrade Screen
