Mediant 2000 SIPMediant 2000 SIP User’s Manual 84 Document #: LTRT-725045.12 Save ConfigurationThe Save Configuration screen enables users to save the current parameter configuration andthe loaded auxiliary files to the non-volatile memory so they are available after a power fail.Parameters that are only saved to the volatile memory revert to their previous settings afterhardware reset.Note that when performing a software reset (i.e., via Web or SNMP) you can choose to save thechanges to the non-volatile memory. Therefore, there is no need to use the Save Configurationscreen.Note: Saving changes to the non-volatile memory may disrupt traffic on the gateway.To avoid this, disable all traffic before saving.¾ To save the changes to the non-volatile, take these 2 steps:1. Click the Save Configuration button on the main menu bar; the ‘Save Configuration’ screenis displayed.Figure 5-37: Save Configuration Screen2. Click the Save Configuration button in the middle of the screen; a confirmation messageappears when the save is complete.
