Alerts5 - 7The report can be sorted by Remote Site ID, Date/Time, and Percent Failed. Thedefault sort order is by Remote Site ID, then Date/Time.Analysis and Corrective ActionsToo many failed networking sessions indicates a networking hardware problem, asetup problem, or a lack of modem capacity on the remote site.Run the Networking Activity Report to obtain more indicators of the problem. Iffailures are associated with one site, alert the administrator of the remote site thatthere is likely a problem with that site’s networking setup or hardware.If the failures do not seem to be specific to any one site, run the SEER QueryReport for Class 36 SEERs indicating network failure events. Check yournetworking modems and cabling; reset them if necessary.Failed Fax Delivery AlertThis alert report is used to notify the administrator when the number of fax deliveryfailures equals or exceeds a threshold. The threshold is the percentage of faxdelivery failures to the total number of fax delivery attempts. A fax delivery fails ifthe complete fax item is not delivered to the target DN. The report contains thefailed fax delivery attempts only. The information in this report may also indicatean application setup problem.Figure 5-5Failed Fax Delivery Alert
