Nortel SR1001 Installation Manual

Contents

Nortel SR1001 Installation Manual Manual pdf 43 page image

31SR1001 Installation GuideVersion 8.3.5Adding Users The configure user command allows the system administrator to add up to 15 users (login ID)and assign each user an access privilege (levels 2-4). Only the system administrator (level 1)can add, modify, or remove this information.To add a new user:1 Enter the terminal configuration mode: SR> configure term2 Type user name, enter the name that you want to add, and then enter the access level tobe assigned to that name (optional). The user name may be up to 30 characters. Thepassword must be 3-10 characters.example:Nortel/configure> user John level 2The Secure Router prompts you to enter a new password.3 Enter the new password.The Secure Router prompts you to re-enter the new password.4 Re-enter the new password.The Secure Router confirms that the password is set and confirms the name of theadded user.You can use the display user_accounts command to view user information.Removing Users The no user name command allows the system administrator to remove configured usernames from the Secure Router.To remove a user name:1 Type no user name, followed by the user’s name.example:Nortel/configure> no user John2 Press Return.The user name is removed from the Secure Router.