28 Chapter 3 Task summaryN0075588N0075588iii) For calls coming in from the private networkConfiguration > Telephony > Dialing Plan > Private Network > Dialing Plan - PrivateNetwork panel > Private Network Settings subpanel > Private Received number lengthfieldandConfiguration > Telephony > Dialing Plan > Private Network > Dialing Plan - PrivateNetwork panel > Private Network Settings subpanel > Private DN length field(Private DN length is used for DPNSS applications only. Refer to the BCM 4.0 NetworkingConfiguration Guide.)Internal Reference: “Basic parameters” on page 65External Reference: BCM 4.0 Networking Configuration Guide6 Verify the line pool assignment of VoIP trunks.In the default configuration, the VoIP trunks are assigned to line pool BlocA. Instructions inthe SRG200/400 Release 1.5 Configuration Guide assume that the default configuration hasbeen maintained.Configuration > Telephony > Lines > Active VoIP Lines > Active VoIP Lines table > Linecolumn > Details for Line subpanel > Parameters tab > Line Type fieldExternal Reference: BCM 4.0 Networking Configuration Guide7 The SRG supports four analog loop trunks on the main unit*. Verify the line pool assignmentof these trunks.In the default configuration, these trunks are assigned to line pool A. Instructions in theSRG200/400 Release 1.5 Configuration Guide assume that the default configuration has beenmaintained.Configuration > Telephony > Lines > Active Physical Lines > Active Physical Lines table> Line column > Details for Line subpanel > Parameters tab > Line Type fieldExternal Reference: BCM 4.0 Networking Configuration Guide* Category 1 countriesIP telephone configuration1 Configure the registration password.Configuration > Resources > Telephony Resources > IP & App Sets row > Details forModule subpanel > IP Terminal Global Settings tabInternal Reference: “Registration password” on page 512 Configure the local mode indication (Advertisement/Logo).Configuration > Resources > Telephony Resources > IP & App Sets row > Details forModule subpanel > IP Terminal Global Settings tabInternal Reference: “Local mode indication” on page 533 Configure the IP telephone codec and jitter settings.
