51SRG200/400 Release 1.5 Configuration GuideChapter 5Setting up IP telephonesIP telephone setup and DN configuration are described in detail in the IP Telephone Installationand Configuration Guide and the BCM 4.0 Networking Configuration Guide, respectively.SRG-specific procedures and settings include:• “Registration password” on page 51• “Local mode indication” on page 53• “IP telephone codec and jitter settings” on page 53• “Configuring telephone (DN) records” on page 54• “Configuring received numbers” on page 57• “Configuring DHCP settings” on page 58• “Call forwarding options” on page 58• “Configuration settings for redirected phones” on page 59• “Test Local Mode” on page 59• “Features in local mode” on page 60• “911 Emergency Services Support” on page 61Registration passwordIf a registration password is configured on the SRG, the IP telephone installer must enter thepassword before the telephone can be configured.To set the IP telephone registration password1 In Element Manager, navigate to Configuration > Resources > Telephony Resources.2 On the Modules panel, locate the Actual type column and select the IP & App Sets row (seeFigure 7).3 On the Details for Module: subpanel, select the IP Terminal Global Settings tab.
