Notifier AM2020 User Manual

Also see for AFP1010: Manual User guide Operator instructions Operation and installation manual

Contents

Notifier AM2020 User Manual Manual pdf 225 page image

4-11Security 15088:K 03/21/01MM Security Access Monitor:Address: LXXMYY (Installer specified).Type ID: SACMControl-By-Event: (Za*)Custom Label: Installer Option (describe specificlocation of module).Tracking: Yes - Each unsecured state andrestoral will be printed when theprint option is enabled.No - the first unsecured state willbe printed when the print option isenabled (restorals will not print un-til reset at Central Station - shortcondition only).Annunciator: No (Not required).Yes (if annunciator mapping de-sired)Annunciator PointMapping (Optional): AxxPyy*'a' is an installer specified num-ber. In this example, all modulesmust be assigned the same zonenumber.B: MM programming:Address: LXXMYY (Installer specified).Type ID: SARMControl-By-Event: ( )Custom Label: Installer Option (describe locationof module).Tracking: Yes - Results in required acknowl-edgment at Central Station for ev-ery unsecured state. Restoral isautomatic.No - Results in required acknowl-edgment at Central Station for firstunsecured state only (until reset atCentral Station - short conditiononly).Annunciator: No (Not required).Yes (if annunciator mapping de-sired)Annunciator PointMapping (Optional): AxxPyyGroup Interface:A: CM programming:Address: LXXMYY (Installer specified).Type ID: CMXCControl-By-Event: (Za*)Custom Label: Security Group OutputSignal Silence: NoWalk Test: Yes/No (Installer Specified).Annunciator: No (Not required).MM = CMProgramming Key for Figure 1.3-4