Notifier ID50 SERIES Operating Manual

Also see for ID50 SERIES: Installation, comissioning & configuration manual Operating manual Installation, commissioning & configuration manual

Notifier ID50 SERIES Operating Manual Manual pdf 14 page image

ID50 Series Panel - Operating ManualAutomatic Alarms - What to do10997-264-000-8, Issue 8January 20072 If a service contact number has been entered duringpanel commissioning, the LCD alternates between thefault message(s) and the following:Note: Press the MUTE BUZZER pushbutton to silencethe panel’s internal buzzer.3 When the cause of the fault has been cleared, pressthe RESET pushbutton.3.3.1 Power Fail1 The loss of a power supply causes the panel to entera Power Fail condition. The POWER SUPPLY FAULTand general FAULT LEDs illuminate and the internalbuzzer operates. The LCD displays:a. Fault condition.b. Fault number currently displayed.c. Total number of faults logged.d. Time fault was logged.e. A text message describing the fault.A battery fault is shown on the LCD as follows:2 If a service contact number has been configured, theLCD alternates between the power fault message andthe service contact number.Note: Press the MUTE BUZZER pushbutton to silencethe panel’s internal buzzer.3 When the cause of the fault has been cleared, pressthe RESET pushbutton.If both the AC andBattery power fail, theindicators and LCD arenon-operational.FAULT 01 / 02 14:55NO MAINS SUPPLYFAULT 01 / 03 14:55For Service Contact ***** ******A B C DEFAULT 01 / 02 14:55BATTERIES MISSINGA B C DEStatus: NORMALSat 01/12/2001 00:00:00Status: NORMALSat 01/12/2001 00:00:00