Notifier ID50 SERIES Operating Manual

Also see for ID50 SERIES: Installation, comissioning & configuration manual Operating manual Installation, commissioning & configuration manual

Notifier ID50 SERIES Operating Manual Manual pdf 37 page image

ID50 Series Panel - Operating ManualOperator Actions at Panel33 997-264-000-8, Issue 8January 20074.10.4 Delays - User OptionThe Disable / Enable Delays option allows the user tocancel or initiate the Delays function of the panel, whichis configured during commissioning (refer to 997-263ID50 Series Panel Installation, Commissioning andConfiguration Manual, Sections 5.5.5.4 Primary/Extend Delay Timers and 5.7.8 CBE Zones).To Disable / Enable Delays:1 Using the numeric keypad, press the ‘ 4 ’ button toselect the Disable/Enable Delays option:2 At the prompt, press the ‘ 5 ’ button to confirm theDelays operation. If delays are disabled, the LCDprompts to enable delays, and vice versa.When the delays are disabled, the DELAY ACTIVELED is extinguished. When the delays are enabled,the LED is illuminated.If a Day Mode time period is configured, the CBE Ruledelays will activate when Day Mode is started either:a. Using the Disable / Enable menu, orb. When Digital / ÜE Input 1 is operated (if this inputis configured during commissioning for Day ModeStart).These delays will be deactivated when Day Mode isended, either automatically at the end of the configuredDay Mode period, or by one of the following:a. Using the Disable / Enable menu,b. When the Digital / ÜE Input 1 is operated,c. Delays are disabled using the Disable / Enablemenu.[U0 Disable/Enable] 1:Zone 2:Outputs3:Day Mode 4:DelaysDisable DelaysPress ✓ to confirm <:Cancel[U0 Disable/Enable] 1:Zone 2:Outputs3:Day Mode 4:Delays54