Notifier ID50 SERIES Operating Manual

Also see for ID50 SERIES: Installation, comissioning & configuration manual Operating manual Installation, commissioning & configuration manual

Notifier ID50 SERIES Operating Manual Manual pdf 32 page image

ID50 Series Panel - Operating ManualOperator Actions at Panel28997-264-000-8, Issue 8January 2007[U0 Disable/Enable] 1:Zone 2:Outputs3:Day Mode 4:Delays[Disable/Enable] Zone _ _Enter Zone Number < : Cancel14.10 DISABLE / ENABLE - User OptionThis option allows the user to disable or enable (dependingon their current state) the following parts of the system:a. Zone (Device or Full Zone).b. Outputs.c. Day Mode.d. Delays.To display the DISABLE/ENABLE menu:1 At the ‘Status: NORMAL’ message, press the ‘ ’button. The LCD prompts for a Level 2/3 access code.2 Either turn the keyswitch or, using the numeric keypad,enter the correct Level 2 access code and confirmusing the ‘ 5 ’ button to display the menu. The LCDdisplays the user number ([U0] to [U9]) in the top left-hand corner.Note: An incorrect access code causes the LCD todisplay the ‘ERROR - INCORRECT PASSCODE’message. After one minute the LCD returns to the‘Status: NORMAL’ message.3 Using the numeric keypad, press the ‘ 2 ’ button todisplay the DISABLE / ENABLE menu.4.10.1 Zone - User OptionThis option allows the user to disable/enable a full zone orpart of a zone (selected devices). To perform this operation:1 Using the numeric keypad, press the ‘ 1 ’ button toselect the Disable/Enable Zone option.2 The LCD displays the Zone option and prompts for azone number. Enter the zone number (one or two digitsentered via the numeric keypad). Press the ‘ 5 ’ toconfirm the zone number.[U0] 1 : Test 2 : Disable/Enable 3 : Clock4 : View Mode 5 : Commission[U0 Disable/Enable] 1:Zone 2:Outputs3:Day Mode 4:Delays2ACCESS TO MENUS RESTRICTEDEnter Level 2/3 Passcode: . . . . < : BackSp