Notifier ID50 SERIES Operating Manual

Also see for ID50 SERIES: Installation, comissioning & configuration manual Operating manual Installation, commissioning & configuration manual

Notifier ID50 SERIES Operating Manual Manual pdf 43 page image

ID50 Series Panel - Operating ManualOperator Actions at Panel39 997-264-000-8, Issue 8January 20074.12.2 Devices - User OptionThe Devices User Option allows the user to observe allloop devices in turn. To view Devices, from the View Modemenu:1 On the numeric keypad, press the ‘ 2 ’ button to selectthe Devices display.The LCD displays the last-viewedsensor address:2 Press the ‘ 2 / 8 ’ buttons to scroll through deviceaddress entries until the desired sensor is displayed.3 Press the 6 ’ button to view additional deviceinformation.Note: Three percentage values are displayed [this is thedevice’s alarm level status, e.g. 100% (default) isequivalent to alarm]. The value on the left is thecurrent alarm status level. The other percentagevalues are historical; the previous two alarm statuspercentages are displayed, the one on the left beingthe more recent.4 Press the ‘ 4 ’ button to return to the View Modemenu.AWACS TM Devices (ID60 only)The ID60 panel allows the configuration of all sensortypes, except HEAT sensors, to use the AWACS TM multi-sensing algorithm. For these devices an additional screenis available which displays the current percentage valuesfor alarm and pre-alarm.[U0 View] 1:Log 2:Devices 3:Faults4:Input Events 5:Disabled ↕ : More[U0 Sensor 02 - OPT] >: Next ↕ : MorePW1:286 2:283 3:285 4:1003 5:0292 <:Exit[U0 Sensor 03 - OPT] >: Next ↕ : MorePW1:286 2:283 3:285 4:1003 5:0292 <:ExitDeviceTypeDeviceAddressPulse WidthTime Periods228[U0 Sensor nn - OPT] >: Next ↕ : MoreLevel 050% -〉〉〉〉〉 050% -〉〉〉〉〉 050%[U0 Sensor nn - AAA] >: Next ↕ : MorePW1:286 2:283 3:285 4:1003 5:0292 <:Exit[U0 Sensor nn - AVS] >: Next ↕ : MoreAWACS - Alarm: 000%, Prealarm: 000%