OHAUS Ranger 7000 R71MHD3 Instruction Manual

Also see for ranger 7000: Instruction manual Quick start guide Instruction manual Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 R71MHD3 Instruction Manual Manual pdf 19 page image

RANGER®7000 SCALES EN-17The Configuration screen is now displayed.Select the list item and press the buttoncorresponding to the icon to change thesetting as desired.To return to the Application home screen, pressthe button corresponding to .The Counting Configurations are defined below (defaults in Bold).Item Available Settings CommentsAuto Tare On, Off Turns Automatic Tare on/offChain Tare On, Off To enable Chain (Continuous)TareAccumulate Off , Automatic, Manual To enable Accumulation / TotalizationAuto Opt.* On, Off To enable Automatic Optimization of APWAPW Auto Save* On, Off To enable APW Automatic saveOpt. Beep On, Off To enable Optimization BeepNote: * If APW value is directly entered (not through sampling), this feature does not work.4.2.3 AccumulationSee section 4.1.2 for details about the Accumulation feature.4.2.4 Input/Output (I/O) SetupThe I/O’s can be customized for various user preferences.The I/O’s are defined below (defaults in Bold).Item Available SettingsDiscrete Input 1 Off, Zero, Tare, Clear Tare, Print, Unit, AccumulateDiscrete Input 2 Off, Zero, Tare, Clear Tare, Print, Unit, AccumulateDiscrete Output 1 Off, Overload, UnderloadDiscrete Output 2 Off, Overload, UnderloadDiscrete Output 3 Off, Overload, UnderloadDiscrete Output 4 Off, Overload, UnderloadNote: The I/O’s will only work when the I/O Option Board have been installed. See the Accessory list in section 9.4for information.The option I/O board provides two isolated inputs and four dry-contact normally open relay outputs which can beused for simple process weighing.Press the button to enter the Main Menu.With the button corresponding to the icon, go downthe list and highlight Application Mode. Enter this sub-menuby pressing the button corresponding to the icon.