OHAUS Ranger 7000 R71MHD3 Instruction Manual

Also see for ranger 7000: Instruction manual Quick start guide Instruction manual Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 R71MHD3 Instruction Manual Manual pdf 40 page image

EN-38 RANGER®7000 SCALES4.10 LibraryWhen an item is processed on a regular basis, the item’s data may be stored in memory for future use. Thismemory is referred to as the Scale’s Library.The following data is stored for the Application used:Application PN(Part Number)Name Preset Tare APW Ref./TargetWeightCheckLimitsSPSet PointsMaxRecordsWeighing x x x 300Counting x x x x 300Percent N/A xCheck x x x x x 300Dynamic N/A xFilling x x x x x 300Formulation x x x x 30Differential N/A xDensity N/A xNotes: Maximum length of PN and Name is 30 characters.For the formulation library, each record can store up to 100 components.4.10.1 Creating a Library RecordTo create a Library record, press the Library button . The requested data records will appear according tothe active application mode (see section 4.10 above). In this example the Weighing Library screen is now displayed.To return to the previous screen press the Librarybutton again.To add a Library record, press the buttoncorresponding to the icon .The New Library Item screen is displayedPress the button corresponding to the iconto enter PN by using the alphanumerickeypad.Press the button corresponding to the iconagain to save the Barcode.Repeat the process to enter Name, Tare Weightand other values by using the button correspondingto to move down in the list.Note: Library Names can be 8 characters or less.Press the button corresponding to the icon to go back to Library List screen.