OHAUS Ranger 7000 R71MHD3 Instruction Manual

Also see for ranger 7000: Instruction manual Quick start guide Instruction manual Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 R71MHD3 Instruction Manual Manual pdf 73 page image

RANGER®7000 SCALES EN-7110. COMPLIANCECompliance to the following standards is indicated by the corresponding mark on the product.Mark StandardThis product conforms to the EMC Directive 2004/108/EC, the Low Voltage Directive 2006/95/ECand the Non-automatic Weighing Instruments Directive 2009/23/EC.The complete Declaration of Conformity is available online ateurope.ohaus.com/europe/en/home/support/compliance.aspx.AS/NZS CISPR 11, AS/NZS 61000.4.3UL Std. No. 60950-1 (2nd edition)CAN/CSA-C22.2 No. 61010-1-04Important notice for verified weighing instrumentsWeighing instruments verified at the place of manufacture bear one of the preceding marks on thepacking label and the green ‘M’ (metrology) sticker on the descriptive plate. They may be put intoservice immediately.Weighing instruments to be verified in two stages have no green ‘M’ (metrology) on the descriptiveplate and bear one of the preceding identification marks on the packing label.The second stage of the initial verification must be carried out by the approved serviceorganization of the authorized representative within the EC or by the national weights andmeasures (W+M) authorities.The first stage of the initial verification has been carried out at the manufacturer’s work.It comprises all tests according to the adopted European standard EN45501:1992, paragraph8.2.2.If national regulations limit the validity period of the verification, the user of the weighing instrumentmust strictly observe the re-verification period and inform the respective W+M authorities.FCC NoteThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference whenthe equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmfulinterference to radio communications. Operation of this equipment in a residential area is likely to cause harmfulinterference in which case the user will be required to correct the interference at his own expense.Industry Canada NoteThis Class A digital apparatus complies with Canadian ICES-001.ISO 9001 RegistrationIn 1994, OHAUS Corporation, USA, was awarded a certificate of registration to ISO 9001 by Bureau Veritus QualityInternational (BVQI), confirming that the OHAUS quality management system is compliant with the ISO 9001standard’s requirements. On June 21, 2012, OHAUS Corporation, USA, was re-registered to the ISO 9001:2008standard.