OHAUS Ranger 7000 R71MHD3 Instruction Manual

Also see for ranger 7000: Instruction manual Quick start guide Instruction manual Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 R71MHD3 Instruction Manual Manual pdf 31 page image

RANGER®7000 SCALES EN-29The Percent Configurations are defined below (defaults in Bold).Item Available Settings CommentsAuto Tare On, Off To enable Automatic TareChain Tare On, Off To enable Chain Tare (continuous Tare)Accumulate Off, Automatic, Manual To enter Accumulation / Totalization4.6 FillingThis application allows the user to fill a container to a pre-determined target weight. The progress bar displays thefilling status, and within 10 percent of the target value the progress bar converts to fine resolution(+/– 10%) for accurate results.Press the button until Filling is displayed in the upper left portion of the home screen.The default (or last) Target weight is displayed. Place objects on the pan to begin.The FILLING Home screenMain Display LineReference FieldsFunctions Application IconNote: Refer section 9.5, or press the button for button icon explanation.4.6.1 Target Weight and Set Points SetupThere are three ways to set up the Target weight:1. Place the weight on the pan and press buttoncorresponding to the icon.2. Key in the target weight value using the alphanumericalkeypad and press the button corresponding to the icon.3. Press the button corresponding to the (SetPoint) icon to enter the Edit Settings screen.The Edit Settings screen is now displayed.Press the button corresponding to the icon toswitch between Weight, Tolerance and Percent.Select the list item and press the button correspondingto the icon ,to change the setting as desiredusing the alphanumerical keypad.To return to the Application home screen, press thebutton corresponding to the icon .