4 Basic copy operations4-60 CS250/CS240/CS2314.12 Selecting finishing settingsVarious settings can be selected for sorting and finishing copies fed into the copy output tray.2 NoteAs the factory default, "Group" is selected.!DetailIf no finisher is installed and all of the following conditions are met, printed copies are fed out and sortedin an alternating crisscross pattern.A4- or B5-size paper is used.Paper of the same size and type is loaded with the w orientation in one paper tray and with the vorientation in another tray.The "Auto" Paper setting is selected.The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.2 NoteFrom Administrator Settings mode, the machine can be set so that copies are fed out without beingshifted when the finisher is installed. As a factory default, the machine is set to shift the copies that arefed out.For details on specifying settings for shifting copies that are fed out when the finisher is installed, referto "System settings" on page 13-23.For details on "Fold/Bind" and "Center Staple / Fold", refer to "Selecting a folding setting" onpage 4-72.2 NoteIf the post inserter has been installed onto the finisher, the finisher can be operated manually. Fordetails, refer to "Manually using the finisher" on page 4-81.
