CS250/CS240/CS231 9-83Application functions 98 Touch [OK], and then touch [Close] in the next screen that appears.9 Specify any other desired copy settings.– To cancel the setting and select the default, press the [Reset] key.10 Using the keypad, type in the desired number of copies.11 Press the [Start] key.Printing previously registered stamps ("Stamp" function)1 Position the document to be copied.– Use the Copy Protection Utility to register a registered stamp. For details on registering stamps,refer to the manual of the Copy Protection Utility.– For details on positioning the document, refer to "Feeding the document" on page 4-8.2 Touch [Application], and then touch [Stamp/Composition].– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes tothe settings are canceled.The Stamp/Composition screen appears.3 Touch [Stamp].– To cancel the "Stamp" function, touch [No].The Stamp screen appears.
