CS250/CS240/CS231 5-21Additional copy operations 5Setting the "Key Repeat Start/Interval Time" functionsThe length of time until the value begins to change after a touch panel button is held down and the length oftime for the value to change to the next number can be specified.0 The settings specified for the Key Repeat Start/Interval Time functions are only applied in the EnlargeDisplay mode.1 Display the Accessibility Setting screen.– For details on displaying the Accessibility Setting screen, refer to "Displaying the accessibilitysetting screen" on page 5-19.2 Touch [Key Repeat Start/Interval Time] or press the [2] key in the keypad.The Key Repeat Start/Interval Time screen appears.3 Touch [+] and [-] to specify the starting time and the interval for the key repeat feature.– To extend the time, touch [+].– To reduce the time, touch [-].– Both settings can be set between 0.1 and 3.0 seconds in 0.1-second increments.– To cancel changes to the settings, press the [Reset] key.4 Touch [OK].The Accessibility Setting screen appears again.
