CS250/CS240/CS231 6-67Troubleshooting 66 Return the shutter of the staple cartridge holder to its original position.7 Insert the staple cartridge holder, sliding it along the rails in thecompartment.– Check that the staple cartridge holder is securely insertedas far as possible.8 Close the front door.2 ReminderIf stapling still cannot be resumed, even after performing the above procedure, contact your technicalrepresentative.Clearing jammed staples in the saddle stitcher!DetailFor details on clearing misfed paper in the finisher, refer to "To clear a paper misfeed in Finisher FS-519"on page 6-52.1 Remove all paper from the finisher.2 Open the misfeed-clearing door, and then remove all paper.3 Close the misfeed-clearing door.4 Raise the output tray, and then push down the staple cartridgeholder to remove it.
