VL3622c/VL2822c/VL2222c 5-435.4 [Application] 55.4.7 [Erase][Frame Erase]Copies can be produced by erasing shadows of punched holes, unnecessary areas around the original text,such as the transmission information on received faxes and the shadows of punched holes. All four sidesaround the original can be erased in the same width or in a different width for each side.% Press [Application] ö [Erase] ö [Frame Erase].[Non-Image Area Erase]This function enables copying with the ADF open while having an original that cannot be loaded in the ADFplaced at a desired position on the Original Glass.The original is automatically detected and the area outside the original text is erased.Erase methods include [Bevel] and [Rectangular]. [Bevel] is used when the background of the original is thinand [Rectangular] is used when it is dark.You can place the original on any position without opening or closing the ADF so that you can make copiespromptly. In addition, toner consumption will be reduced as the area outside the original text is erased.Settings[Frame] Erases the four sides of the original in the same width.[Top] [Right] [Bottom] [Left] Erases each frame side in a different width.[+]/[-] Press [+] or [-] to set the erasing width between 1/16 inch (0.1 mm) and 2inches (50.0 mm). The erasing width can also be entered using the keypad.[None] Sets the erasing width to 0 inches (0 mm).A: 1/16 inch to 2 inch (0.1 mm to 50.0 mm)
