VL3622c/VL2822c/VL2222c 7-497.10 [Security Settings] 77.10.5 [Enhanced Security Mode]The enhanced security mode cannot be enabled when any of the current functional settings conflict with theenhanced security mode.When the enhanced security mode is enabled, the settings required for the mode or the settings that havebeen forcibly switched when entering the mode cannot be changed.Required settingsTo enable the enhanced security mode, the following settings must have been configured.Settings to forcibly changedWhen the enhanced security is enabled, the following settings are forced.- The changed settings will not revert when the enhanced security mode is turned off.- After the password rules have been changed, any passwords that do not comply with the changed ruleswill not be authenticated. For details on the password rules, refer to page 7-47.- For details on the network settings to be forcibly changed, refer to the [User's Guide NetworkScan/Fax/Network Fax Operations].Administrator Settings Required settings[User Authentication/Account Track] / [GeneralSettings] / [User Authentication]Select either [ON (External Server)] or [ON (MFP)].• When you enable account track, select [Ac-count Name & Password] for the account trackinput method.[Security Settings] / [Administrator Password] Set a password complying with password rules.[Security Settings] / [HDD Settings] / [HDD Encryp-tion Setting]Specify a HDD encryption passphrase.[Security]/[PKI Settings]/[SSL Setting] in Web Con-nection• Set [Mode using SSL/TLS] to [Admin. Mode]and [User Mode].• Set [Encryption Strength] to [AES-256] or[3DES-168].• [Image Controller Setting]• [Management Function Choice]• [CE Password]• [CE Authentication]• [HDD]All the settings above must be configured by yourservice representative.These items must be configured by your servicerepresentative. For details, contact your servicerepresentative.Administrator Settings Settings to forcibly changed[System Settings] / [Restrict User Access] / [Re-strict Access to Job Settings] / [Registering andChanging Addresses]Set to [Restrict].[User Authentication/Account Track] / [GeneralSettings] / [Public User Access]Set to [Restrict].[User Authentication/Account Track] / [User Au-thentication Settings] / [Administrative Settings] /[User Name List]Set to [OFF].[User Authentication/Account Track] / [Print with-out Authentication]Set to [Restrict].[Security Settings] / [User Box Administrator Set-ting]Set to [Restrict].[Security Settings] / [Security Details] / [PasswordRules]Set to [Enable].[Security Settings] / [Security Details] / [ProhibitedFunctions When Authentication Error]Set to [Mode 2], and the number of tries is set to 3.• The number of tries can be changed to 1, 2, or3.[Security Settings] / [Security Details] / [Confiden-tial Document Access Method]Set to [Mode 2].