Accessibility44-14 VL3622c/VL2822c/VL2222c4.7[Key Repeat Start/IntervalTime]Specify the length of time until the value begins to change after a TouchPanel button is held down, and also specify the length of time for the valueto change to the next number.The settings specified for Key Repeat Start/Interval Time are only appliedin Enlarge Display mode.[System Auto Reset Confir-mation]Specify whether to display a message when the system auto reset opera-tion is performed in Enlarge Display mode, allowing the user to choose ei-ther to continue operating without exiting Enlarge Display mode or to exitEnlarge Display mode and return to the basic settings screen.Also specify the duration of time for displaying the confirmation screen.[Auto Reset Confirmation] Specify whether to display a message when the automatic panel reset op-eration is performed in Enlarge Display mode, allowing the user to chooseeither to continue operating without resetting the current settings or to re-set the settings.Also specify the duration of time for displaying the confirmation screen.[Enlarge Display ModeConfirmation]Specify whether to display a message when the Enlarge Display key ispressed to change the display of the screen, requesting confirmation tocancel the settings that cannot be specified in Enlarge Display mode.[Message Display Time] Specify the duration of time for displaying warning messages, which ap-pear, for example, when an incorrect operation is performed.[Sound Setting] Configure the settings for sounding associated with key operations. Thefollowing sound setting functions are available. To produce a sound, press[Yes], and then select the volume from [Low], [Medium] and [High]. To notproduce a sound, press [No].[Operation Confirmation Sound]• [Input Confirmation Sound]: A sound produced when a key in the Con-trol Panel or a button in the Touch Panel is pressed for an entry• [Invalid Input Sound]: A sound produced for invalid button operation inthe Control Panel or the Touch Panel• [Basic Sound]: A sound produced when the default value item is select-ed for an option subject to rotational switching[Successful Completion Sound]• [Completed Operation Sound]: A sound produced when the operationhas completed normally• [Completed Transmission Sound]: A sound produced when a commu-nications-related operation is completed normally[Completed Preparation Sound]: A sound produced when a device is ready[Caution Sound]• [Simple Caution Sound (Level 1)]: A sound produced when the replace-ment time is nearing for supplies or a replaceable part and a messageappears in the Touch Panel• [Simple Caution Sound (Level 2)]: A sound produced for a user error• [Simple Caution Sound (Level 3)]: A sound produced when an error oc-curs that can be corrected by the user by referring to the message thatappears or the User's Guide• [Severe Caution Sound]: A sound produced when an error occurs thatcannot be corrected by the user or requires action by a service repre-sentative[Default Enlarge DisplaySettings]For details, refer to the [User's Guide Enlarge Display Operations].Settings
