VL3622c/VL2822c/VL2222c 7-297.4 Print - Application (Public, Personal, or Group User Box) 7Stamp Repeat TypeDetail SettingsPress [Detail Settings] to specify the text color, density, and other items.PositionIn the Stamp Repeat setting screen, press [Position] to determine the print position of the stamp, for example,by angling the stamp or leaving a space.Configure the following settings.- Setting an angle of the stamp repeat within the area (+45 degrees/0 degrees/45 degrees)- Inserting a space between stamp repeats- Reordering printing order of stamp repeat- Deleting the stamp repeat or space[Detail Settings] Specify the color, density, and text size of stamp repeat to be printed.[Position] Select the angle or printing order of stamp repeat to be printed.Item DescriptionItem Description[RegisteredStamp]Press this button to apply the stamp images that were pre-registered with the utilitysoftware.• Use Copy Protection Utility to register stamps. For details, refer to the relevantutility software manual.• Registered stamps may require multiple areas depending on their contents.[Preset Stamp] Press this button to apply a standard string such as Invalid Copy, Copy, or Privateas a preset stamp. One stamp requires one area.[Date/Time] Press this button to apply the date and time the document was registered.• [Date Format] requires one area.• [Time Format] requires one area.[Other] Press this button to specify the job number, serial number, and distribution controlnumber the document was registered with.• [Job Number]: The job number for the print job is printed. A job number requiresone area.• [Serial Number]: The serial number assigned to this machine is printed. The serialnumber requires one area. The serial number is assigned at the time of shipmentof this machine. For details on settings, contact your service representative.• [Distribution Control Number]: The entered number of copies is printed. A distri-bution control number requires one area. Enter the distribution control number,and select "Number Only" or "Put zeros in front(total 8-digits)" as the output for-mat.Item Description[Text Color] Select the text and background colors from black, magenta, or cyan.[Density] Select the density from the light, standard, or dark.[Text Size] Select the printing text size from Minimal, Standard, or Large.[Pattern Over-write]Select pattern printing from [Front (Overwrite)], [Transparent], or [Back].Item Description[Change Pos./De-lete]Select Stamp Repeat to be changed, and press [Change Position]/[InsertSpace]/[Delete] to specify.