VL3622c/VL2822c/VL2222c 8-98.2 User mode settings 8Relay User BoxYou can create up to five Relay User Boxes. The creation and editing setting items are as follows.Reference- To change the setting of a created User Box, select the target User Box and press [Edit].- If [Edit] is selected, you cannot change the User Box number.- To delete a created User Box, select the target User Box and press [Delete].d ReferenceFor details on how to register the header or footer, refer to the [User's Guide Network Scan/Fax/Network FaxOperations].Item Description[User Box No.] Automatically displays an unassigned number. To specify a User Boxnumber, press [User Box No.], and use the keypad to enter the User Boxnumber between 1 and 999999999.[User Box Name] Press [User Box Name], and enter the User Box name in the control panel(up to 20 characters). Specifying different User Box numbers enables youto create User Boxes with the same name.[Relay Destination] Select a relay destination to send data from the Relay User Box. Pre-reg-ister the relay destination as a group destination.• When registering a group destination as a relay destination, be sure toset Abbreviation Dial in the group destination in advance.[Relay TX Password] Specify a password to limit access to the User Box. Press [Relay TX Pass-word], and enter the password in the control panel (up to 8 characters).