11FAX TRANSMISSION SEQUENCEThis section explains the basic procedure for sending a fax.Place the original.Place the original in the document feeder tray of the automaticdocument feeder, or on the document glass.Change the mode.Change to fax mode.Touch the [Mode Switch] key and then touch the [Fax] key.☞ BASE SCREEN OF FAX MODE (page 6)Select image settings.Touch the [Image Settings] key to select settings for theoriginal to be faxed.• [Exposure] key: Use this key to adjust the exposure of theimage.☞ CHANGING THE EXPOSURE (page29)• [Resolution] key: Use this key to adjust the resolution of theimage.☞ CHANGING THE RESOLUTION(page 28)• [Original] key: Use this key to select the original size, theoriginal send size and two-sided originalscanning.☞ SPECIFYING THE ORIGINAL SCANSIZE AND SEND SIZE (Enlarge/ReduceSending) (page 30), AUTOMATICALLYSCANNING BOTH SIDES OF ANORIGINAL (2-sided original) (page 34)• [Special Modes] key: Touch this key to use a convenientspecial mode.11Quick FileFileSpecial ModesAddress EntryAddress BookFaxPC ScanUSB Mem. ScanInternet FaxScanMode SwitchImageSettingsSend SettingsData EntryQuick FileFileSpecial ModesSub AddressAddress BookFaxMode SwitchImageSettingsDirect TXMemory TXAuto ReceptionFax Memory:100%AutoExposureStandardResolutionOriginal Special ModesAuto 8 x111/2
