185Fax Polling SecurityThe following settings are for regular polling memory using the Public Box.Touch the [Image Send Settings] key, the [Fax Settings] key, and then the [Fax Polling Security] key to configure thesettings.Polling Security SettingWhen the memory polling function is used, this settingdetermines whether any machine will be allowed to pollyour machine, or only machines that have beenspecified in your machine.To enable this setting, select the checkbox andtouch the [OK] key.Passcode Number SettingWhen the Polling Security Setting is enabled (seeabove), use this setting to store (or delete) the faxnumbers of the machines that are allowed to poll yourmachine. The stored fax numbers are called passcodenumbers. Up to 10 passcode numbers can be stored.1 Touch the [Enter] key.2 Touch a key that has no number stored(a blank key).If numbers have been stored in all of the keys, a messagewill appear and no further numbers can be stored. Firstdelete a number that is no longer needed and then storethe new number.3 Press the numeric keys to store the faxnumber.Up to 20 digits can be entered.To enter a hyphen, touch the [Pause] key. To enter aspace, touch the [Space] key. To enter "+", press the" " key.If you make a mistake, press the [CLEAR] key ( ) andre-enter the correct digits.4 Touch the [OK] key.Return to step 2.To store another number, repeat steps 2 through 4.5 Touch the [OK] key.1 Touch the [Delete] key.2 Touch the key of the number you wish todelete.3 Touch the [Yes] key.Return to step 2.To delete another number, repeat steps 2 and 3.4 Touch the [OK] key.Note that these settings do not apply to F-code polling memory.If the Polling Security Setting is enabled, enter thenumbers of the fax machines that will be allowed topoll your machine in "Passcode Number Setting"below.Storing passcode numbersSystem SettingsPasscode Number SettingEnter OKCancel1/2Deleting a passcode numberSystem SettingsPasscode Number SettingDelete OKCancel1/20123456789 0123456789
