119RELAY REQUEST TRANSMISSION USINGF-CODESThis function is used to send a fax to an F-code memory box (relay broadcast) in another machine and have thatmachine relay the fax to multiple end receiving machines.When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the endreceiving machines can help reduce phone charges. A relay request transmission can be used in combination with thetimer transmission function to further reduce phone costs.• Verify the F-code (sub-address and passcode) and end receiving machines programmed in the memory box (relaybroadcast) before you perform an F-code relay request transmission.• Before this function can be used, the end receiving machines must be programmed in the F-code memory box (relaybroadcast) in the relay machine.• The end receiving machines do not need to support F-code communication.• This function can be used in combination with a broadcast transmission or timer transmission. An F-code relay requesttransmission can also be stored in a program.• Your machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax to theother machine (the relay machine). The other machine (the relay machine) bears the cost of sending the fax to each of theend receiving machines.System Settings for Fax: F-Code Memory BoxThis is used to create memory boxes (relay broadcast) for F-code relay broadcast transmission.A memory box name, sub-address, passcode, and end receiving machines are programmed in each box.☞ Programming an F-code Memory Box (Relay Broadcast) (page 154)Your machineTransmissionThe fax is transmitted to each of theend receiving machines programmedin the F-code relay broadcast memorybox.Relay machineF-code relaybroadcast memoryboxBox name: BBBBSub-address: AAAAAAAAPasscode: XXXXXXXXSub-address: AAAAAAAAPasscode: XXXXXXXXTransmission specifying an F-codeEnd receiving machines areprogrammed in this box.
