176Must Input Next Address Key atBroadcast SettingThis setting is used to require that the [Next Address]key be touched before the next address is entered whenperforming a broadcast transmission.When this setting is enabled, the [Next Address] keycannot be omitted even if the next address is enteredwith a one-touch key.If a user attempts to enter the next address withouttouching the [Next Address] key, a double-beep alarmwill sound and the entry will be rejected.To enable this setting, select the checkbox andtouch the [OK] key.Scan Complete Sound SettingThe scan complete sound can be selected.Select one of the keys and touch the [OK] key.The Number of FileName/Subject/Body KeysDisplayed SettingThis setting is used to select the number of file name /subject keys that are displayed in the screen. Thenumber of keys can be set to 3 or 6.Select one of the keys and touch the [OK] key.The Number of Direct AddressKeys Displayed SettingThis setting is used to select the number of one-touchkeys that are displayed in the Address Book screen. Thenumber of keys can be set to 6 or 9.Select one of the keys and touch the [OK] key.Disable Switching of Display OrderThis is used to prohibit changes to the order of display(order search number, ascending, descending) in theAddress Book.When this setting is enabled, touching a tab in theAddress Book screen does not change the order. Thecurrently selected display order will be the order that isused after the setting is selected.To enable this setting, select the checkbox andtouch the [OK] key.Hold Setting for Received DataPrintThis function holds received faxes and Internet faxes inmemory without printing them. The faxes can be printedby entering a password (factory default setting: 0000)with the numeric keys.To enable this setting, select the [Received Data Hold]checkbox , enter a password with the numeric keys ifyou wish to change the password, and touch the [OK]key.System SettingsScan Complete Sound Setting OKScan Complete SoundVolume:SmallVolume:MiddleVolume:BigNoSoundSystem SettingsHold Setting for Received Data PrintReceived Data HoldPassword SettingInput a new password and press [OK].0000OK
