121RELAY BROADCAST TRANSMISSIONUSING F-CODESWhen your machine receives an F-code relay request transmission, the fax is received to an F-code memory box (relaybroadcast) in your machine.Your machine then relays the fax to each of the end receiving machines programmed in the memory box. Transmissionto the end receiving machines takes place automatically.• Prior to the operation, inform the requesting party of the sub-address and passcode of the memory box (relay broadcast) inyour machine.• The end receiving machines are programmed in the F-code relay broadcast memory box when the box is created in yourmachine.• The end receiving machines do not need to support F-code communication.• The other machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax toyour machine (the relay machine). Your machine (the relay machine) bears the cost of sending the fax to each of the endreceiving machines.Machine requestingrelay broadcastTransmissionThe fax is transmitted to each of theend receiving machinesprogrammed in the F-code relaybroadcast memory box.Your machineF-code Memory Box(relay broadcast)Box name: BBBBSub-address: AAAAAAAAPasscode: XXXXXXXXSub-address: AAAAAAAAPasscode: XXXXXXXXTransmission specifying an F-codeEnd receiving machines areprogrammed in this box
