157513. JOB BUILDThis function allows you to copy different kinds of originals at one time.Scanning is performed by setting the optimal original mode and image adjustment for each original (it iscalled a job). After all the originals have finished being scanned, they can be copied at one time.Also, the original scanning source (Reversing Automatic Document Feeder or original glass) of originalscan be switched per job, and so, for example, after originals such as multiple LD texts, news clips, photo-graphs in magazines and multiple LT photographs with the appropriate settings have finished beingscanned, they can be copied in the scanned order in one go. And the scanned data can be stored in e-Fil-ing.• Up to 2000 pages of originals are possible.• Any number of jobs can be set until the total number of scanned original pages reaches 2000.There are restrictions on the settings for JOB BUILD: Settings not available for JOB BUILD, common set-tings which are set before scanning the first job and applied to all jobs, and changeable settings for eachjob. See the following table to perform the setting.Settings not availablefor JOB BUILDCommon settingsfor all jobsChangeable settingsper each jobAutomatic Paper Selection (APS)Book to 2Image editingXY zoomCover copyingSheet insertion modeMagazine sortMagazine sort & Saddle stitch2IN1 / 4IN1Tab paperInsertere-Filing/fileMixed-size originalPaper size to be copiedSort modeImage shiftBook center eraseTime stampPage numberImage direction in 2-sidedcopyingBook <-> tabletReproduction ratioAutomatic magnification selection(Default setting for JOB BUILD)Original sizeOriginal mode2-sided (or 1-sided) copyingBackground adjustmentSharpnessEdge eraseDual-pageADF / SADF
