42 1.BEFORE USING EQUIPMENT4.Setting Copy Paper (Cont.)1Océ-recommended paper / Handling and storing paperRecommended paperTo make copies with a fine image, the following types of paper are recommended.If you wish to use copy paper other than the recommended types, consult your service technician.* Only Océ-recommended OHP film should be used. Using any other film may cause a malfunction.Handling and storing paperPay attention to the following points:• Avoid using paper that is specially treated or previously printed on another machine, and also avoidperforming double copying on the same side of the paper, since this may cause a malfunction.• Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or rough paper; thismay cause paper misfeeds.• Paper should be wrapped in its wrapping and stored in a damp-free place.• To prevent paper from being folded or bent, store it evenly on a flat surface.Paper type Océ recommendations/Manufacturer ModePlain paper TIDAL/Hammermill (20 lb. Bond) PLAINThick Laser/Hammermill (24 lb. Bond) THICK1(32 lb. Bond) THICK2Exact Index/WAUSAU (90 lb. Index) THICK2(110 lb. Index) THICK3Tab paper Copytabs/Blanks USA TABTracing paper Tracing Paper/Ostrich International (20 lb. Bond only) PLAINSticker labels 5165/Avery THICK3OHP film * PP2500L/3M OHP FILMX-10.0/Folex OHP FILM
