6724. Interrupt CopyingWhile continuous copying is in progress, you can interrupt this job with another copy job.The following features cannot be used together with interrupt copying:• Cover sheet copying• Sheet insertion copying• Job build• Store to e-Filing / Copy & File• [e-FILING] / [SCAN] / [FAX] buttons• To enable “Copy & File”, the Scanner Kit or the Printer/Scanner Kit (both optional) is required.• The [SCAN] button is enabled only when the Printer/Scanner Kit or the Scanner Kit (both optional) isinstalled.• The [FAX] button is enabled only when any of the FAX Unit, Printer/Scanner Kit and Scanner Kit (alloptional) is installed.2 Replace the original with a new one.• Set other copy modes as required.3 Press the [START] button on the control panel.4 After you have finished the interrupt copying, press the [INTERRUPT]button again.• The message “READY to resume job 1” appears and the interrupted job resumes.Interrupt copying is automatically canceled after a certain period by automatic function clearing without the needto press the [INTERRUPT] button again. The interrupted job (= Job 1) resumes after this automatic functionclearing.1 Press the [INTERRUPT] button on thecontrol panel.• The [INTERRUPT] button blinks first, then lights after “Job inter-rupted job 1 saved” appears.When the [INTERRUPT] button is pressed while originals arebeing scanned, the [INTERRUPT] button blinks first. Then the but-ton lights after “Job interrupted job 1 saved” appears when thescanning is finished.
