6926. Bypass CopyingBypass copyingWhen you want to make copies on OHP film, sticker labels, or non-standard size paper, place the sheetsof paper on the bypass tray. Bypass copying is also recommended for copying on standard size paperwhich is not in any of the drawers.The following basic features can be used without specifying the paper size.• Book Center Erase, XY Zoom, Cover Sheet, Sheet Insertion, Job Build, Image Direction,Book Tablet and InserterThe following features can be used by specifying the paper size in addition to the basic features.• Image Shift, Edge Erase, Dual Page, 2IN1/4IN1, Magazine Sort, Editing, Time Stamp, Page Numberand Tab Paper in the Edit menu• Rotate Sort, Hole Punch and Magazine Sort in the Sort Options menu• "1 -> 2 Duplex", "2 -> 2 Duplex" and "Book -> 2" in the Duplex Modes menu• APS and AMS in the Enlargement/Reduction menuTo carry out bypass copying, open the bypass tray.The operating procedure of bypass copying differs depending on the paper size used. See the corre-sponding page for the operating procedure of each size. The table below shows these pages.To set tab paper on the bypass tray, see P.171 “Setting tab paper on the bypass tray”.• Bypass copying stops when the paper placed on the bypass tray runs out during copying, even if thesame size paper is in any of the drawers. Copying is resumed when paper is supplied to the bypasstray.• When bypass copying has completed, the [FUNCTION CLEAR] button on the control panel blinks.Press this button to switch it to default copying using the drawers. (Bypass copying is automaticallycanceled after a certain period by automatic function clearing without the need to press the [FUNC-TION CLEAR] button. The bypass copying returns to default copying using the drawers after this auto-matic function clearing.)Paper size ProcedureStandard size LD, LT, LG, ST-R P.70Other than the above P.72Others (Non-standard size) P.74
