|
4 Utility 4-44 Océ im9220Utility Chapter 44.3.14 6 Expert Adjustment>Timing AdjustmentUse this function to set the following items for timing adjustment when print-ing or scanning.!DetailBy default, the Timing Adjustment key is not displayed. Contact yourservice representative.- Printer Top Margin AdjustmentAdjust the top margin.Available range: =30 (wide) to +30 (narrow), 1 step = 0.1mm- Printer Regist Loop AdjustAdjust the amount of registered loop based on a paper feed tray (trays 1to 4), a bypass tray, and ADU.Available range: -10 (wide) to +10 (narrow), 1 step = 1mmTray Side 1: Available range: -5 (wide) to +5 (narrow), 1 step = 1mm- Printer Pre-RegistAdjust the amount to pre-register based on a paper tray (trays 1 to 4), abypass tray, and ADU.Available range: -10 (wide) to +10 (narrow), 1 step = 1mmTray 1 to 4: Available range: -5 (wide) to +5 (narrow), 1 step = 1mm- Lead Edge Margin SelectionAdjust the amount of image erase from the edge of the sheet.Available range: -20 (wide) to +40 (narrow), 1 step = 0.1mm- Top Image (Original Glass)Adjust the restart timing in scanning the original with the original glass.Available range: -40 (fast) to +40 (slow), 1 step = 0.1mm- Top Image (ADF)Adjust the restart timing in scanning the original with ADF.Available range: -50 (fast) to +50 (slow), 1 step = 0.1mm- Scanner (ADF) Regist Loop AdjustAdjust the amount of registered loop in scanning the original with ADF.Available range: -10 (short) to +10 (long), 1 step = 0.5mmPrOcédure1 Press the [Utility/Counter] to display the Utility Screen.
|
