6 Web Connection Setting6-8 Océ im9220Web Connection Setting Chapter 66.4 Administrator ModeBy logging into Web Connection in Administrator Mode, you can configureor confirm the image controller system.For the details on the login prOcédure for Administrator Mode, see “Loggingin Using Administrator Mode” on page 6-6.6.4.1 System TabOn the [System] tab, information concerning the system configuration of themachine and settings is displayed.Administrator PasswordThis screen appears when you click [Administrator Password] on the [Sys-tem] tab. The screen is used to change the administrator password.- Current Password:Enter the current administrator password. The password is displayed inasterisks (*).- New Password:Enter a new administrator password. Maximum eight alphanumeric char-acters can be used. The password is displayed in asterisks (*).- Retype New Password:Retype the new password as entered above for confirmation.- [Apply] button: Click the button to apply the new settings.- [Clear] button: Click the button to clear the settings that were entered orselected.
