Utility 3Océ im9220 3-49Utility Chapter 33.5 3 Copier Setting3.5.1 1 Reset Setting>1 Initial SettingBesides the factory default setting (Full Auto), you may set the copying con-dition as the initial setting as desired.Resetting the machine:- when the power is turned off- when Panel Reset is on- when Power Save is on- when copying becomes available by entering the password when UserAuthentication/Account Authentication is on- when a key counter or a copy card is inserted- when pressing the [Reset] on the control panelFull Auto copying condition:- Basic Setting: Copy set; 0001, Simplex/Duplex; 1>1, ADF; ON, Density;AES, Zoom; 1.000, Auto Paper Select; ON- Finishing: Set by “2 Reset Function Setting”- Combine Original: Combine Originals; OFF, Original Direction; Normal,Bind; Right & Left Bind, Special Original; Normal, Original Size; StandardSize- Orig. Image Type: Text/Photo- Application: OFFPrOcédure1 Set the desired copy condition as the initial setting.2 Press the [Utility/Counter] to display the Utility Screen.3 Touch [3 Copier Setting].The Copier Setting Screen will be displayed.4 Touch [1 Reset Setting].
