Utility 3Océ im9220 3-43Utility Chapter 33.4.14 5 Tandem Setting>3 Tandem Sub Machine Shift Data Set-tingSet the sub machine to use the same shift value used on the master machine.!DetailBy default, the Tandem Setting key is not displayed. Contact your servicerepresentative.2 NoteIf the setting 2 Tandem Sub Machine Wait/Proof is set to [Prohibit], theshift value previously specified for the sub machine cannot be used be-cause the transmitted image data already reflect the shift value specifiedfor the master machine.PrOcédure1 Press the [Utility/Counter] to display the Utility Screen.2 Touch [2 Function Setting].The Function Setting Screen will be displayed.3 Touch [5 Tandem Setting].The Tandem Setting Screen will be displayed.
