Controller Setting 2Océ im9220 2-3Controller Setting Chapter 202 Printer SettingVarious printer settings are available from this screen. See page 2-8.!DetailIt may not operate properly depending upon the combination of settingsselected.Menu Items Description DefaultNo. Specify the default output setting foreach number.1-611 Basic Setting The following default settings areused unless otherwise specified bythe printer driver.1 PDL Select the page description lan-guage to be initially used.Auto, PCL, PS, TIFFAuto2 Paper Feed Tray Select the paper feed tray to be ini-tially used.The selectable items vary dependingupon the configuration of installedoptions.Auto, Tray 1, Tray 2, Tray 3, LCT, By-passAuto3 Output Tray Select the exit tray to be initiallyused.Auto, Main Tray, Sub TrayAuto4 Duplex Select to allow double-sided print-ing.Off, OnOff5 Binding Select the binding position to be ini-tially used.Top, Left, RightLeft6 Staple Select the staple position to be ini-tially used.Off, 1 Staple (Left), 1 Staple (Right),2 StapleOff7 Punch Select the punch position to be ini-tially used.Off, 2 Holes, 3 HolesOff8 Fold/ Trimming Select the initial setting for eachfunction.Off, Z-fold (A3/B4/11×17/8K), Z-fold(8.5×14), Fold & Staple, Fold & Sta-ple/Trim, half fold, Letter fold IN, Let-ter fold OUTOff9 Offset Select to use the offset function.On, OffOff
