2 Controller Setting2-4 Océ im9220Controller Setting Chapter 210 Output Order Select to exit face up or face down ininitial state.Face Down, Face UpFace Down11 Image Order Select the print page order in initialstate.1 to N, N to 11 to N12 Print Number Specify the print quantity in initialstate.1 to 9999113 Sort Select to use the finishing mode.Collated, UncollatedCollated14 Paper Size Select the paper size to be initiallyused.When specifying tabs, select thenumber of tabs as well.A3, B4, A4, B5, A5, B6, 8×13,8.25×13, 8.125×13, 11×17, 8.5×14,8.5×13, 8.5×11, 5.5×8.5, A3W, B4W,A4W, B5W, 11×17W, 8.5×14W,8.5×11W, 5.5×8.5W, 8.5×11Tab,A4TabA415 Orientation Select the orientation of the imageprinted on copy paper.Portrait, LandscapePortrait16 Banner Option Select to print the banner page.Off, OnOff17 Banner Tray Select the paper feed tray for print-ing banner page.The selectable items vary dependingupon the configuration of installedoptions.Auto, Tray 1, Tray 2, Tray 3, LCT, By-passAuto18 Convert PaperSizeSelect to change the paper size.Off, 8.5×11/11×17 to A4/A3, A4/A3to 8.5×11/11×17Off19 Combination Specify the desired combinationfunction.Off, 2 in 1, 2 repeat, 2 repeat-revers-al(L), 2 repeat-reversal(R), 2 repeat-reversal(U), 2 repeat-reversal(D)Off20 Booklet Select to use the Booklet function.Off, OnOff21 Adhesive Binding Select to use the Adhesive bindingmode.Off, OnOff22 Print Position Select the initial print position.Rear Edge, Center, Lead EdgeRear EdgeMenu Items Description Default
