7-16Installation and Maintenance VolumeOctel Overture 200/300 Serenade 3.0 PB60014–01In this example, this command displays all Works for Serenade activity in the CPT log that occurred onor after 11:25 a.m., July 9, 1997.Examples Using LOG PR CPT for Untraced ActivitiesThe following examples use the LOG PR CPT command to display activities that cannot be traced usingthe L T command.LOG for Digital Networking (LAN)You can also use the LOG command to review the timing and sequence of all high-level communicationto and from the LAN for digital networking. The following activities can be displayed: Communication to the LAN card being lost and reestablished This activity could be caused by LAN card restarting or the LAN card being removed andreinserted. Communication to other high-speed locations being lost and reestablished This activity could be caused by the other location experiencing a restart or the digitalconnection to the other location being interrupted across the network. Message transfer traffic The sending side shows the message number being sent, the creator, and the result of thetransfer. The receiving side shows the message number being received and the new message in which it isstored. Activities for a specified source creator mailbox Activities for a specified LAN channelThe LOG command can show information both in real time, as it happens, or for a previous period byspecifying a start date and time. All entries are time-stamped as they occur.Example of All LAN Type EntriesIn this example, the start time (S) is specified as 97 4 21, and the type of filter (TY) is specified asLAN. This example displays all log entries in the TYPE column that start with LAN.
