12-72Installation and Maintenance VolumeOctel Overture 200/300 Serenade 3.0 PB60014–01Upgrade LanguagesThis section provides the procedures to follow to prepare the system disk(s) for more than one language. Up to amaximum of four languages can be installed. Disk space for the additional prompts can be allocated and languages added before they have been purchased.Order Administration can increase the number of languages installed on the message server to a maximum offour.When the DISKO option, Upgrade Language is entered, the message server prompts to enter the quantity oflanguages desired. The amount of reallocated disk space is determined by the number of languages entered.The upgrade can take several hours.Caution!When Upgrade Language is performed, the voicestorage capacity on each system drive is decreased byapproximately one hour per language installed. Eachsystem drive must have at least one hour of voicestorage for each language installed, as prompts arestored redundantly.Action Octel Overture 200/300 Description and ResponsePrepare the System1. Forward ports.Boot the System2. Make sure software diskette #1(for the correct release level) iswrite-protected.3. Insert software diskette #1 (forthe correct release level) intothe FD.4. Adjust the baud rate of theterminal/teleprinter to 300, 1200or 9600 baud.
