- 118 -Initializing6 6. TroubleshootingFormatting a Particular PartitionYou can initialize a particular partition within theSD memory card’s 3 partitions (two “Common”partitions and “PCL” partition).Note● When you initialize a partition, the following data isdeleted.- Common: Job data and demo data stored with[Secure Print], [Encrypted Secure Print] or[Store to SD Card].- PCL: Form data in the PCL area1 Press the <ENTER> button.2 Press to select [Admin Setup] andthen press the <ENTER> button.3 Enter the administrator password usingthe ten-key pad.The default password is “aaaaaa”.4 Press the <ENTER> button.5 Press to select [SD Card Setup] andthen press the <ENTER> button.6 Press to select [Format Partition]and then press the <ENTER> button.7 Press to select the partition youwant to initialize and then press the<ENTER> button.A message appears notifying you that continuingwill automatically restart the system. Select[Yes] to continue.Initializing Flash MemoryFlash memory stores data such as form data,etc.Use the following steps to initialize.Note● When you initialize flash memory, the following data isdeleted.- Custom demo data- Form data1 Press the <ENTER> button2 Press to select [Admin Setup] andthen press the <ENTER> button.3 Enter the administrator password usingthe ten-key pad.The default password is “aaaaaa”.4 Press the <ENTER> button.5 Press to select [Flash MemorySetup] and then press the <ENTER>button.6 Make sure that [Initialize] is selectedand then press the <ENTER> button.7 Make sure that [Execute] is selectedand then press the <ENTER> button.A message appears notifying you that continuingwill automatically restart the system. Select[Yes] to continue.
