Oki C822n User Manual

Also see for C822dn: User manual

Contents

- 54 -Changing the Equipment Settings3 3. Changing Printer SettingsItem Factory Default DescriptionAdmin Setup Flash MemorySetupInitialize (NULL) Initializes the resident flash memory.SD CardSetupInitialize (NULL)ResizePartitionPCL nn% 20% Sets the partition size.Commonmm%50%Commonll%30% (NULL)Format Partition PCLSystem Setup Near Life Status Enable Sets whether to display the warning thatinforms the drum, fuser, or belt is nearthe end of life on the LCD display.Near Life LED Enable Sets the LED lamp control of the warningthat informs the toner, drum, fuser, orbelt is near the end of life.Idle Display Toner Gauge Selects the information shown on thedisplay during idling.Panel Contrast 0 Adjust the contrast of the LCD ofoperation panel.Buzzer Setup Invalid OperationVolumeOff Sets the volume of the buzzer for theinvalid operations.Error Volume Off Sets the volume of the buzzer for errors.Power Setup Power Save Enable Sets whether to enable the power savemode.Sleep Enable Sets whether to enable the sleep mode.Auto Power Off Auto Config Sets the auto power off function.ChangePasswordNew Password (NULL) Sets a new password to enter the[Admin Setup] menu and [Boot Menu].Verify Password (NULL) Enter the new password set in[New Password] to verify.Enter the password consisting of 6 to12 digits with alphanumeric characters(lower case).Settings Reset Settings (NULL) Resets EEPROM of CU to initialize theuser menu settings.Save Settings (NULL) Saves the current menu settings.Restore Settings (NULL) Restores the stored menu settings.