- 72 -Windows Utilities4 4. Using Utility SoftwareNetwork ExtensionIn Network Extension, you can check thesettings on the printer and set the compositionof the options.In order to use Network Extension, TCP/IP mustbe activated.Note● Administrator privileges are required.Memo● Network Extension is automatically installed wheninstalling a print driver through a TCP/IP network.● Network Extension is operated in conjunction withthe print driver. You cannot opt to only have NetworkExtension installed.● Network Extension only functions when the printer driveris connected to OKI LPR port or the standard TCP/IP port.Launching the UtilityTo use Network Extension, open the printerproperties screen.1 Click on [Start] and then select[Printers and Faxes].2 Right click on the printer icon and select[properties].Checking Printer SettingsYou can check the settings of the printer.Memo● If you use Network Extension in an environment that isnot supported, the [Device Options] tab may not bedisplayed.1 Open the printer properties screen.Reference● “Launching the Utility” P.722 Select the [Status] tab.3 Click [Update].4 Click [OK].Reference● Click [Web Setting] to automatically launch the webpage. You can change printer settings on this web pagescreen. For details, refer to “Web page” P.61.Setting Options AutomaticallyYou can get the composition of options of theconnected printer and automatically set the printdriver.Memo● You cannot configure this when using Network Extensionin unsupported environments. For Windows1 Open the printer properties screen.Reference● “Launching the Utility” P.722 Select the [Device Options] tab.3 Click on [Get Printer Settings].4 Click [OK].Uninstalling the Utility1 Click on [Start], and then select[Control Panel]>[Add or RemovePrograms].2 Select [OKI Network Extension] andclick on [Remove].3 Follow the instructions on the screen andcomplete the uninstallation.
