33-81 Using Spot-OnC9800 Color Guide - 81Use the Tab key to move from field to field. As you enter each new value, the previewpatch updates to reflect the old and new colors.4. Click OK.The new color appears as the center patch in the Spot-On Color Search window.Using a measurement instrument to target colorsIf you have the EFI Densitometer ED-100 or EFI Spectrometer ES-1000, you canimport measured color values directly into Spot-On. This feature allows you to targetmatches based on the actual colors of immediate objects, such as the red of a printedlogo or the yellow of a packaging envelope.For best results, download and save any measurement data you have gathered with theED-100 or ES-1000 in its offline state. Spot-On automatically clears stored data whenit establishes a connection with the instrument. For information on downloadingstored data from the ED-100 or ES-1000, see the documentation included with theinstrument.TO IMPORT COLOR MEASUREMENTS INTO S POT -O N1. Install and set up the ES-1000 or ED-100 for use with your computer.For installation and setup instructions, see the documentation that came with theinstrument.2. Choose Start from the Instrument menu.The Choose Port dialog box appears.3. For Instrument, choose the instrument you will use to take measurements. For Port,choose the serial port connection of the instrument. Click OK.The indicator light on the instrument flashes for a few moments as the connection toSpot-On is established. When the flashing stops, the instrument is ready to readmeasurements.4. Place the ED-100 or ES-1000 over the target color, making sure to center the sampleaperture over the color. Press Measure to take the measurement.