Faxing > 1114. Touch the Properties tab.Select from the following features as required:5. Place the document to be scanned on the scanner unit glass or ADF.6. Press the START button.CONFIRMING FAX TRANSMISSIONYou can check fax transmission status from:FAX Log: To print this report, press the SETUP button on the scanner unit control panelthen press the Report button followed by the Print button associated with the FAX LogReport.NO. FEATURE OPTIONS DESCRIPTION1 Original Size Auto, 8.5x11,8.5x11R, 8.5x13,8.5x14, A4, A4RAllows you to select the scanneddocument size.2 Resolution Standard, Fine,PhotoAllows you to specify the scanningresolution for the document. This allowsautomatic (pre-set) optimization ofimage quality settings.3 Sides Single, Top / Top,Top / BottomAllows you to define simplex or duplexand the duplex orientation of front andback sides of a page for scanning.4 Lighter/DarkerLighter / Darker-5 to +5 by 1Allows you to select the brightness level.5 Tx Time Enter transmit time Allows you to enter (via the Softkeyboard) a delayed fax transmit time.NOTEIf you specify Auto for Original Size, the MFP automatically selects the papersize to match the original document. However, depending on the documentconditions (for example, if the background density is high), document sizesmay not be detected automatically. In this case, specify the document sizemanually.1 2 3 45
