Scanning – e-mail send mode > 877. Place the document to be scanned on the scanner unit glass or ADF.8. Press the START button.CONFIRMING E-MAIL TRANSMISSIONYou can check the transmission status of e-mails from:> Job Log screen: Press the Job Log button to display this screen.> E-mail Log Report: To print this report, press the SETUP button on the scanner unitcontrol panel then press the Report button followed by the Print button associatedwith E-mail Log.NOTEIf you specify Auto for Original Size, the MFP automatically selects the papersize to match the original document. However, depending on the documentconditions (for example, if the background density is high), document sizesmay not be detected automatically. In this case, specify the document sizemanually.
