Printing from Windows – PCL > 14SETTING THE DRIVER DEVICE OPTIONSThis section explains how to ensure that your printer driver can utilise all of the hardwarefeatures installed in your printer.Accessories such as hard disk, duplex unit (two sided printing), additional paper trays, etc.,will only be usable if the printer driver on your computer knows they are there.In some cases the hardware configuration of your printer is automatically detected whenthe driver is installed. However, it is advisable to at least check whether all of the availablehardware features are listed in the driver.This procedure is essential if you subsequently add extra hardware features to your printerafter the drivers have been installed and set up.To set the driver device options:1. Access the driver’s Properties window.2. Select the Device Options tab.3. Set the options for any devices you have installed, including the correct number ofpaper trays, finisher, duplex unit, etc.4. Click OK to close the window and save your changes.NOTERemember that if your printer or MFP is shared between users on differentcomputers, the driver must be adjusted on each user’s machine.
