2 Installing Client Software10 Installing Network Fax SoftwareInstalling Network Fax SoftwareThis chapter includes procedures for installing software required to enable the fax printing andonline address books for this equipment. It is recommended that you read these instructions intheir entirety before beginning the installation process.OverviewBefore you can begin utilizing the network fax feature for this equipment, you must install thesoftware using the Drivers & Network Utilities CD-ROM provided. You will use the InstallShieldclient software setup process. This section describes several ways to add N/W-Fax driver touser’s workstations. Prior to installing the N/W-Fax driver and Address Book Viewer, the admin-istrator must install specific hardware and configure the fax options. Only authorized users canmodify the device.System RequirementsThe N/W-Fax driver and Address Book Viewer are available for following environments:y Display Resolution1024 x 768 dots or morey Display ColorHigh Color (16bit) or higher is recommendedy CPUPentium 133 MHz minimum (Pentium 266 MHz or faster recommended)y MemoryThe required memory size for OSy OSWindows 98 (Windows 98 Second Edition Recommended)Windows MeWindows NT 4.0 Service Pack 6aWindows 2000 Service Pack 4Windows XP Service Pack 1/Service Pack2Windows VistaWindows Server 2003Before Installing Client SoftwareBefore installing the client software, confirm the following to perform an appropriate installation.— When N/W-Fax Driver and Address Book Viewer Has Been InstalledIf the N/W-Fax Driver and Address Book Viewer has been installed from either the Drivers &Network Utilities CD-ROM, you do not have to install it again.If you want to install N/W-Fax Driver and Address Book Viewer from this CD-ROM, uninstall theexisting N/W-Fax Driver and Address Book Viewer then reinstall it using this Drivers & NetworkUtilities CD-ROM. When you uninstall the Address Book Viewer, please click [No] at the dialogbox that displays the message to delete the settings for the Address Book Viewer so that youcan restore the settings after installing the new Viewer.