Managing Address Book 61Configuring Discovery SettingsYou can configure the discovery settings.y DevicesClick the arrow button to display the pull down list and check the model name that you wantto search.y Network - Enable IPX/SPX SearchThis is disabled because the Address Book Viewer does not support the IPX/SPX connec-tion.y Network - Enable TCP/IP SearchCheck on this to search devices that connect to the TCP/IP network. This is available onlywhen the TCP/IP protocol is installed in your computer.When this is enabled, select how it searches printers in the TCP/IP network.- Search local subnet — Select this to search devices in local subnet.- Specify a range — Select this to search devices in specific range of IP addresses.When this is selected, enter the IP addresses in “From” field and “To” field to specify therange.- IPv4 — Select this to search devices set with an IPv4 address.- IPv6 — Select this to search devices set with an IPv6 address.
